Dagger 6.2 Seat Cracking Question

Has any1 had any cracking at the seat screw that connect's the seat to the boat on the side under the key whole?

Replies to This Discussion

Permalink Reply by Ken "hobie" Hoeve on June 19, 2009 at 12:11pm

Have not seen it on any of my boats or any around here. If it is an issue with your boat I would suggest reaching out to the retailer you purchased it from and have them look into a resolution with Dagger. Our boats carry the best warranty in the industry. Take the boat to your retailer and have them give an opinion. If they feel it is a warranty they will contact our offices in South Carolina and they will take it from there.

hobie
Team D since 1997

▶ Reply

Permalink Reply by Jeff Bush on July 30, 2009 at 1:38pm

I have a Demo Juice 7.1 and I had an issue where the screws that held the seat down wore a hole through the bottom of my boat. I fixed the issue by pulling the seat out and putting some plastic between the screw and the bottom of the boat. Then, I heated the bottom of my boat and melted some plastic onto the bottom to plug the whole. I haven't had any problems since. I got the plastic from my local boat retailer.

I'm sure this would void the warranty, but considering my boat was a Demo, I didn't have a warranty to void.