Crack my nomad!
Replies to This Discussion
-
Permalink Reply by Iker Beristain on -
there is a very easy way to fix that nomad, you need something to scratch the crack to give some space for the new plastic, cut a little piece of your boat, it has to be thinner than a pencil, and at last, with a heat gun, melt the piece of plastic in the crack, doing circles i hope that works for you
.
-
Permalink Reply by Craig Ray on -
bojan,
I'm the webmaster here with Dagger, and I've sent your request to customer service. I'll have someone post on this shortly to supplement Iker's response or to contact you if necessary.
Thank you for posting,
Craig
-
Permalink Reply by Chris on -
bojan,
We can evaluate it for a warranty through the local retailer, preferable where it was purchased. I'd suggest giving them a call before dropping in. They'll contact us and provide the serial number, the date purchased, lots of pictures, and a description of where and how it happened.
Chris
Customer Service
-
Permalink Reply by Andrew Roan on -
Plastic Weld. I would drill a hole in both ends of that crack right now though because it will continue to split if you don't.
© 2013 Created by Craig Ray.
Powered by
